top of page

​轉檔說明

[Solidworks]
1. File > Save As 
2. Set Save As Type to STL 
3. Options > Resolution > Fine > OK
4. Save

 

[SolidEdge]
1. File > Save As 
2. Set Save As Type to STL 
3. Options 
4. Set Conversion Tolerance to 0.001in or 0.0254mm 
5. Set Surface Plane Angle to 45.00 
6. Save

 

[SolidDesigner](Version 8.x)
1. File > Save 
2. Select File Type > STL 
3. Select Data 
4. Click OK

[U.G.]
1. File > Export > Rapid Prototyping 
2. Set Output type to Binary 
3. Set Triangle Tolerance to 0.0025 
4. Set Adjacency Tolerance to 0.12 
5. Set Auto Normal Gen to On 
6. Set Normal Display to Off 
7. Set Triangle Display to On  

[I-DEAS] 
1. File > Export > Rapid Prototype File > OK 
2. Select the Part to be Prototyped 
3. Select Prototype Device > SLA500.dat > OK 
4. Set absolute facet deviation to 0.000395 
5. Select Binary > OK 

 

[Rhino] 
1. File > Save As 
2. Select File Type > STL 
3. Enter a name for the STL file. 
4. Save 
5. Select Binary STL Files
 

[Pro/e]
1. File > Export > Model (or File > Save a Copy) 
2. Set type to STL 
3. Set chord height to 0.0 The field will be replaced by minimum acceptable value. 
4. Set Angle Control to 1 
5. Choose File Name 
6. OK 

 

[ProE Wildfire]
1. File > Save a Copy > Model 
2. Change type to STL (*.stl) 
3. Set Chord Height to 0.0 The field will be replaced by minimum acceptable value. 
4. Set Angle Control to 1 
5. OK 

 

[CADKey] 
1. Choose Stereolithography from Export options 
2. Enter the Filename 
3. Click OK

 

[3D-MAX]  
1. File 
2. Export 
3. Save As > STL
4. Enter File Name 
5. Set Binary
6. Save

bottom of page